주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

7.9 inch display iPad Mini, with 16, 32, or 64 GB of storage.

767 질문 전체 보기

potential problems by soldering the ic chip incorrectly?

Hi

is there any potential pronlems if I solder my own ic chip to a new digitiser? Would it blow anything if a couple of contacts were touching? Or would it simply not work?

Would like to practice this, but not at the expense of someones ipad when i repair it.

would be handy to do, as im fed up of these cheap ones which flicker everytime I lay it flat, and have to cover it in tape.

Thanks

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

플러그없이 공부하세요

Mac 배터리 수리 키트

수리 키트 쇼핑하기

플러그없이 공부하세요

Mac 배터리 수리 키트

수리 키트 쇼핑하기

답변 1개

가장 유용한 답변

Most likely worst case scenario: dead device.

Update

If you don't do it right, you could get the power leads or voltage to where they don't belong. Hence possibility of a dead device is strong.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

Is that fact or just a guess? Just that I would think as the connections would only ne sending signals, then I would imagine the digitiser would go a bit loopy as if the flex cable was pinched? But that's just a guess. Wonder if anyone has actually done it wrong? I know all the local repair shops in this area don't solder the parts.

If you don't do it right, you could get the power leads or voltage to where they don't belong. Hence possibility of a dead device is strong.

Ok, I'm not really experienced at soldering, but practice makes perfect.

wonder if there's some sort of schematic for that connection?

의견 추가하세요

귀하의 답변을 추가하십시오

Duane 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 96