평판: 121
2
2
1
I was following ifixit steps to check the functionality of the hold button (diagnostic). The hold button is working fine (0 and 1). But now my screen is stuck on HP Detect : 0. It says press menu to continue, but when I press menu nothing happens. I have also tried pressing menu twice and several other combinations...
좋은 질문 입니까?
평판: 121
1
1
Plug in the headphones (HP).
해당 답변은 도움이 되었습니까?
...........Hmmmmmmmn? Something about hindsight, and 20x20 eyesight....?!
Thanks!
so i should put my HP laptop away ?
i plugged the earphones. it says now hp detect : 1 menu to continue. i pressed menu but it does not continue.. can you please help?
any clue please e mail me at bernard_khoury@hotmail.com
해당 답변은 도움이 되었습니까?
just take out the headphones and press the menu button then BINGO!!!
Now it says 'Accessories Test'
FW_DETECT = 0
USB_DETECT = 1
Please plug FW
What's this mean????
Firewire (FW) connection vs USB connection:
Turn off hold button
평판: 121
1
1
If it's not continuing, it didn't pass the headphone (HP) test. Ipods have a little detector that stops the ipod if a headphone isn't detected; it'll pause the song if the headphone jack is removed.
You might want to disassemble it and replace the headphone jack. If that doesn't work, it's probably a bad board.
해당 답변은 도움이 되었습니까?
after plugging it in, unplug it, then it should continue
평판: 13
1
I got mine to go to the next stage by clicking the hold switch on and then off.
해당 답변은 도움이 되었습니까?
Now it's stuck on FW DETECT : 0
There's no Firewire to plug in, so I can't test this.
24 시간 전: 4
7일 전: 37
30일 전: 178
전체 시간: 28,474
댓글 1개
—me to. have no idea why. it reboots fine -wasn't doing this a week ago.
BixLives32 의