Auto Brightness doesn't work after replacing the screen.

Question

iPhone 5

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기

giancarlolugo @giancarlolugo

평판: 59

2

1

게시일: 2014년 12월 18일

옵션

Auto Brightness doesn't work after replacing the screen.

I bought the Screen with everything included. I followed the guide to the letter. Today I noticed that the auto brightness feature doesn't work anymore. I can adjust the brightness manually but not automatically. The front camera works, and I know the sensor works because when I am on a call the screen turns off when close to my ear. Did I do anything wrong during installation or is my replacement part faulty?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 4

댓글 달기

답변 2개

선택된 답변

Rany @rany

평판: 41k

iCenter SARL

15

78

89

게시일: 2014년 12월 28일

옵션

Hi Giancarlo,

You need to disconnect then re-seat the screen assembly.

If this doesn't help, you need to get a new complete front camera flex cable (or even much better: get the one from your old screen), and install it using this guide.

If the above doesn't help, let us know, to explore other causes such as problems with or damage to the logic board during previous manipulation.