기기를 수리하세요 커뮤니티 상점

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1169 질문 전체 보기

옵션

backlight not working, how to fix?

Hi, I have really enjoyed your tear-down instructions, and have used them on one or two occasions. (I've also bought tools from you as well as spare iPhone accessories.) I recently had the backlight fail on my iPhone 3G, but I have not found any instructions on how to fix this, except for some instructions that talk about shorting a couple of pins on a microscopic IC in the board (which doesn't sound like how I would fix a light.) Judging from the number of people on the web looking for this information I think it might drive a lot of traffic to your site.

Thanks,

Ed

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 2
댓글 1개

I noticed you never got an answer to this. Are you still having this problem?

의

댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

I eventually took it to an independent wireless service company and they pulled the iPhone open and pulled one of the cables off of the board where it mounts. They scrubbed the connector with contact cleaner and a brush and reassembled it again and the light started working. The same procedure was used by Apple at one of their retail stores to fix another iPhone of mine when half of the screen became unresponsive to touch. It seems a few problems can be fixed by unplugging and reseating the connectors. Ed

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

Please check the terminal legs of the LCD connector.

In the upper right corner of the first two legs.

If they are not shiny silver, have to solder them.

If this does not help you must make an alternative power supply.

www.rm-elektronik.ne

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

ed58 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 6

전체 시간: 19,830