주요 콘텐츠로 건너뛰기

승용차 또는 트럭 스피커, 스테레오, 헤더 장치 및 CD 플레이어 수리

247 질문 전체 보기

Identifying capacitors marked 10.0 and 100 V on my amplifier?

I have a JL Audio 500_1 V2 Car Audio Amplifier. Try as I might, I cannot find replacement capacitors for my JL Audio 500/1 V2 amp. A large resistor overheated and failed, damaging a few nearby components.

The one component that I cannot find to repair the amp is a large capacitor. There are actually two of them on the PCB.

If anyone can help me locate this capacitor, I would really appreciate it. The back one is damaged badly, and I'd really like to repair the amp and keep using it. Thanks!

http://i.imgur.com/EeZYFMa.png

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 3개:

Take a picture straight down of the affected area and post it. what is the logic board reference designator for the component?

They are C520 and C521. Can't take a good photo at the moment.

Did you end up finding them?

댓글 달기

답변 1개

That looks like a ceramic capacitor. The 10.0 refers to 10 micro farads and the 100V refers to 100 volt breakdown voltage. The J is the tolerance, which is +/-5%. The FMK markings are probably manufacturer codes.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

jeromyrew1 take a look at the right side of the capacitor that you described. What do you make out of that?

댓글 달기

귀하의 답변을 추가하세요

Jared 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 4

전체 시간: 426