주요 콘텐츠로 건너뛰기

Released April 2013, model numbers GT-N5100 (3G & Wifi), GT-N5110 (Wifi), and GT-N5120 (3G, 4G/LTE & Wifi)

76 질문 전체 보기

spen not working on whole screen after lcd and digitizer replacment

I had replaced my screen after 60 days from broken.

The touch screen and everytging is working fine, except that the spen is not working in the whole screen.

Exactly acrectangle 2 cm below the screen top with length of 4 cm and width of the screen is not recognizing the spen, otherwise the spen works great.

What can be the problem ?

Thx

Ahmed Ismail

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 3
댓글 달기

답변 3개

Perhaps the digitizer itself is faulty, or maybe the stylus sensor film is damaged in the LCD and digitizer replacement you replaced. The s pen works through the stylus sensor film in the screen.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

Had the same problem. Disconnected and reconnected the two big flex cables that connected screen to mither board.

Perfect after that.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

I have had the same problem. Dropped the phone and had to replace the LCD Unit. Touch screen working perfect but S pen doesn't work anywhere on the screen except towards the top and lower parts of the screen. Pen detection sensor working fine. Do I need to get a new screen again ?

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

ahmed 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 9

전체 시간: 4,725