평판: 55
2
Hello,
I would like to change the ram but i didn't get some specs needed.
Does the "NON ECC" RAM is correct ?
Does 184PIN CAN WORK INSTEAD OF THE 200PIN SELL ON IFIXIT ?
.. Or maybe 200pin RAM will work better ?
DOES 333MHZ IS EXACT RAM FREQUENCIES REQUIRED ?
.. Or this specs is not too look ?
Will old linux recognize this new ram ?
.. Or there is no link to os with changing ram
좋은 질문 입니까?
평판: 479.4k
35
329
971
From EveryMac: PC2700 DDR SDRAM 333 MHz
"The maximum memory capacity of this system is 1.5 GB with 512 MB onboard and a 1.0 GB SO-DIMM."
You can't force fit any memory module (physically or what it runs at). Sadly, these modules are difficult to get as they are no longer being made.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 96
댓글 1개
Here's the spec sheet from EveryMac on your system: iBook G4 1.42 GHz (Mid-2005)
Dan 의