주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기
질문 마감됨

No power after battery replacement

I recently purchased and installed a new battery in my iPhone 5. After installation the phone powered on fine and worked for 6-8 hours. The next day the phone wont power on and wont charge either by computer or wall brick. The vibrate switch also does nothing. I took it back apart and checked all connections and no problems there. Any help would be greatly appreciated.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Did you put the insulator from the original onto the new battery plug?. If not, this can cause a short when touching the metal shield screwed on over it. Also you may need to check the Lightning port, to see if that may also be an issue. As always, try with a different cord and different points of charge to verify it's not any of those things.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 76