주요 콘텐츠로 건너뛰기

An optical disc drive released April 2009, identified by model number iHAS324.

1 질문 전체 보기
질문 마감됨

My disk tray will not stay open, what can I do?

Whenever I press the eject button, the disk tray opens then immediately closes. I can't get my disk in the tray fast enough, because it will not stay open. I know the disk tray belt and motor are working fine.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 4개

선택된 답변

If the disk tray will not open and remain open, you may need to replace the eject button.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
가장 유용한 답변

It won't read, won't stay open, and won't eject. It's probably 5 years old. CDW sells it for $19.99. If blowing it out with compressed air doesn't fix it, you have to ask how much your time is worth.

http://www.cdw.com/shop/products/LiteOn-...

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

See if there is a small hole above the eject button. Use a straightened out paper clip inserted into the hole to manually eject the tray. This takes a bit of force sometimes. Sorry, I just realized that this is a school project question.

댓글 달기
이 답변은 원래 다른 질문의 답변입니다.

There may be a disk jammed in the device. You can try and manually open the drive but be careful as the tray may break. Or you might have to take apart the device and replace the disk tray belt.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
이 답변은 원래 다른 질문의 답변입니다.

No No No,

Drive Belt slipping,

I could not find a replacement.

Lite-On is known for this on quite a few of their drives.

Various remedies online are:

1. place belt in boiling water (supposed to shrink belt).

2. use drive belt conditioner.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 9

30일 전: 10

전체 시간: 289