iPhone 5c home button unresponsive

Question

iPhone 5c

Apple iPhone 5c는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 8, 16, 32GB / 흰색, 분홍색, 노란색, 파란색 및 녹색으로 제공하였습니다.

1234 질문 전체 보기

Andrew Hill @andrewhill80323

평판: 13

1

게시일: 2015년 4월 16일

옵션

iPhone 5c home button unresponsive

Hi, I've got a 5c with an unresponsive home button, was fine before I changed the screen and dock, since then I've changed the home button flex cable and loudspeaker.

I've stripped it down twice and rebuilt, still to no avail.

I was wondering if there are any further parts that could affect the home button working?

I've ordered a new charging dock part and home button,

but need to know if there is anything else to check or change?

I don't believe I have damaged anything or caused static damage

Many thanks

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 4개

선택된 해법

Patrick @c3pt

평판: 283

3

게시일: 2015년 4월 18일

옵션

The home button works by making contact with 2 pins on the dock connector flex. You can see them around where the home button flex metal pads are suppose to land when the screen is closed. On the dock flex side, they look like 2 metal pins that stick out. If you actually bridge them, the home button activates. With the phone on, try bridging it with a paperclip or knife, it should activate the home button. If it doesn't, it's probably a bad dock flex. If it does work, it just might be that the home button flex is not making contact with the dock side. Could also be that the home button flex was damaged.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

Rany @rany 평판: 41k iCenter SARL 15 78 89 · Answer 1 · 2015-04-19T00:06:17-07:00

Rany @rany

평판: 41k

iCenter SARL

15

78

89

게시일: 2015년 4월 19일

옵션

Since you ordered a new charging dock, try to overlay it over the exiting one in your iPhone, connect it, and short the 2 golden prongs of the home button like Patrick said (they are at the end of a flat cable, included in your charging dock assembly).

If the home button function works, try again with the old charging dock.

If it works too, the issue is with your home button flex cable not working or not making contact with the prongs.

If neither charging dock work by shorting, your issue is further down the line, on the logic board. At this point, you need to use good magnification (10x is a minimum, 20x is ok) to examine all visible parts of the logic board, especially around the battery and charging dock connectors. If you see anything damaged, part broken off, or missing, try to upload a good quality picture and we'll take it from there.

Good luck.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기

Charlie Yarak @charlieyarak 평판: 1 · Answer 2 · 2015-04-16T05:19:45-07:00

Charlie Yarak @charlieyarak

평판: 1

게시일: 2015년 4월 16일

옵션

i changed a screen also and now the home button and speaker are not working.

some videos have said that resistors can be knocked off when taking out the battery carelessly.

i think its the gold pin wires sticking out not contacting the home button but that doesn't explain the speaker. I think its the whole charging dock part that has the ribbon flex included.

해당 답변은 도움이 되었습니까?

예 아니요

점수 0

댓글 달기