주요 콘텐츠로 건너뛰기

Updated version of the original iPad 2, released in March of 2012 with a smaller die processor and updated internal construction. Repair will require the use of heat and careful prying.

power, volume and lock buttons not working after cable replacement

I broke the old cable while removing the digitizer. I ordered a new one and followed the guide to remove and replace. Now none of the buttons on the cable work. I have seated the cable into it's socket on the camera board as appropriate (I think), and the cameras still work. Any suggestions on what I should try?

이 질문에 답하기 저도 같은 문제가 있습니다

좋은 질문입니까?

점수 2
댓글 달기

답변 1개

Re-install the new cable, closely following the online instructions. Make sure all screws and connection ports are secure.

이 답변이 도움이 되었나요?

점수 0
댓글 달기

답변을 추가하세요

accounts 영원히 감사할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 4

전체 시간: 265