주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Some problems after Battery replace

Hi,

I have changed my battery and i have a lot of problem...

First i have change the battery and i have a problem, the Touch Id doesn't work.

In Settings when i want to activate it, it's written "Fail".

I don't know why, because i have desassembly the phone without problem..

Few days later, i need to charged 3/4 times my iPhone per day and it's a new Battery ( very good quality buy here) and my External Speaker Doesn't Work...

What can i do ?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 3
댓글 1개

Have you tried to restore from itunes?

댓글 달기

답변 3개

선택된 답변

You may have accidentally damaged some components during installation. Have you inspected the ribbon cables to see if there is any damage? It's always a good idea to go back through and make sure all the connections are clean and fully seated. You can clean them with isopropyl alcohol on a cotton swab, and make sure they're completely dry before you close up the phone again.

Does the home button click function still work?

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

Yes the home button Work, just the Touch ID and the external speaker doesn't work..

댓글 달기

Download a programme on laptop called ibackup bot it will actually tell you how many times the battery has been charged..

Most new batterys you get are never original and have been charged I've 100 times unless you have a good supplier

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

I had the same problem, found sensor cable was not seated fully. Took quiet a few goes to get it right.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

robinphi58 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 2

전체 시간: 191