평판: 1
1
Is there a guide on replacing the AirPort Extreme wireless card?
Model Identifier: MacPro2,1 - 2x 3.0GHz Quad-Core Intel Xeon - 667MHz Memory Bus - Mid 2007
Last four of SN: 1UPZ
좋은 질문 입니까?
평판: 479.4k
35
329
971
The Airport card is located in the top left corner of the main logic board, just under the second HD carrier.
It is held by two Philips screws and has two black antenna cables connected to it.
Slide out the card from the edge connector, place the new card near the old card and carefully pop off each antenna and place it in the corresponding location on the new card. The cables marked 1 and 3 are the ones to use the number 2 cable is not used.
Lastly, slide the new card back into the connector & secure it back down. One thing I do is apply a piece of Kapton tape (non conductive tape) on top of the antenna wires so nothing can short across them.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 190
댓글 4개
Can you give us the last four digits so we can identify which series you have.
Dan 의
Mac Pro "Eight Core" 3.0 GHz (2007)
Dan 의
The info is helpful, but a picture guide would be awesome! Anyone done this before that took the time to document it with pictures?
andrewclark 의
Sorry no, I just looked at my manuals. Some of the older models can be found online.
Dan 의