기기를 수리하세요 커뮤니티 상점

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

옵션

Backlight issue after replacing the digitizer

Had a phone brought into my workshop where someone tried replacing the glass themselves and did a VERY poor job; the connector No3 is destroyed almost completely; however there is no backlight on the LCD (No1 & No2 connectors are absolutely fine); tested the LC Don a different phone - Works OK also tried with a known-good LCD - no backlight

could the No3 connector affect the backlight? if so where could i possibly get it re-soldered?

thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 -1
댓글 2개

i have the same problem

의

try contacting hector truong he's one of the contributors here and he specialises in fixing the connector you have problems with. as for the backlight he may be able to help with that too.

의

댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Hi...

Connector #3 is for the ear piece and well as the ambient light sensor and proximity.

Can you please clarify if there is still am image on the display even though there is no back light.

Getting it resoldered may be a problem... you can buy the FPC connector itself on ebay.... ive provided a link for you...

http://shop.ebay.ca/?_from=R40&_trksid=p...

But finding someone who is capable of micro soldering is going to be the problem.

It may just be easier to replace the entire motherboard.

Hope I was of some assistance...

Darren

Apple Certified Macintosh Technician

London, Ontario, Canada

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Martin 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 2,151