iPad 2 wont display after opening but iTunes can still recognize it.

Question

iPad 2

iPad 2세대, Wi-Fi, GSM 그리고 CDMA 모델이 있습니다. iPad 3 출시 전에 일부 모델을 새롭게 하였습니다. 수리는 어렵고 열과 비집기가 필요합니다.

730 질문 전체 보기

질문 마감됨

lonecrow @lonecrow

평판: 11

게시일: 2015년 7월 6일

옵션

iPad 2 wont display after opening but iTunes can still recognize it.

I opened my iPad 2 for the hope of fixing my digitizer because a small part of it wont work. I removed the screen and the digitizer but after returning it back the screen wont turn on. I want to try restarting it but I cannot turn it off. :(

Notes:

My Power button is not working because of its damage cable
I did not turn off the iPad when removing some parts because I forgot it and my power button is not working.

:(

I remember last time I went to a technician to repair its digitizer , same issue occur but he did something to turn the screen back to normal. I forgot what he said but I guess he said something about grounding it. I really forgot.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 2개

선택된 답변

Sunny @sunny42603

평판: 1.2k

Sunny

5

1

게시일: 2015년 7월 6일

옵션

Hi,

There is a number of ways for you to reset your iPad.

1. You can download a program call Recboot 2.2 the program can put the device in recovery mode.

right after it put your ipad in recovery mode you can use it to exit recovery mode.

2. Unscrew the battery screw and gently slide a business card under it and pull it back out.

Afterward attach it, connect a cable to the iPad and it will boot up.

If none of those options work you might have shorted the backlight filter.

good luck

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 2개:

lonecrow, the trick that the technician used was to reboot the iPad by pressing and holding the Home Button + Power Button together for ~12 seconds. Without a working power button, you can use Sunny's trick (option 2) to achieve the same result. Don't forget to reset the time and date afterwards.

Rany 의 2015년 7월 6일

Thanks a lot it works but I used ReiBoot because Recboot does not work for windows with x64.

lonecrow 의 2015년 7월 7일

댓글 달기

lonecrow, the trick that the technician used was to reboot the iPad by pressing and holding the Home Button + Power Button together for ~12 seconds. Without a working power button, you can use Sunny's trick (option 2) to achieve the same result. Don't forget to reset the time and date afterwards. — Rany
Thanks a lot it works but I used ReiBoot because Recboot does not work for windows with x64. — lonecrow