주요 콘텐츠로 건너뛰기

The Brother MFC-440CN is an all-in-one color inkjet printer with a photo bypass tray first introduced in 2001.

9 질문 전체 보기

"Error 46 clean impossible", anyone has idea of what it means?

At machine start up the message ""Error 46 clean impossible" appears.

user's guide says it is a generic mechanical problem, but there's nothing wrong inside.

Could be the printing head to be replaced?

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
댓글 1개

At least these people don't kid around. What a great fatalistic message! It's to late to work on tonight but I'll research tomorrow. Give us a little bit of time.

댓글 달기

답변 3개

선택된 해법

I am currently working on this myself. It means your ink absorber pad is full. I purchased a new pad, but now I can't find instructions on how to install it. Apparently, Brother really wants you to have a technician do this, or buy a new printer. I've seen posts that say you can clear the message, but if the absorber pad is full, you could end up with a big mess.

해당 답변은 도움이 되었습니까?

점수 2

댓글 2개:

Thank you very much Krystal, finally i got it :)

Where did you get the new pad? /Peter

댓글 달기

From what I can tell is find a guide to dissemble your printer.

It might be messy but not shore if it is possible to wash them out and then dry them? (Just an idea as I have never done this before but was wandering it myself when I was cleaning my printhead and if they possibly need replacing anyways could be worth trying)

If it is anything like mine they come in a plastic holder and is full of a felt like material on both sides of the print heads track and also a couple smaller ones under the print head park position.

Don't know if this link is of any help

http://homepage.ntlworld.com/boots44/bro...

Block Image

Block Image

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

ITS A SIMPLE TRICK FOR YOU TO DISTROY YOUR PRINTER. HERES THE REAL ANSWER. PRESS MENU PRESS BLUE START PRESS MENU , PRESS BLUE MAINTANCE 10 IS ON SCREEN, SCROOL DOWN TO MAINTENANCE 80 AND PUSH OK. PUSH ARROW UP TO PURGE:00011 AND ENTER 2783 PURGE:0000 IS ON SCREEN. PUSH RED/STOP RED/STOP AND UNPLUG. LET IT REST FOR A MINUTE. PLUG BACK IN AND DO IT AGAIN FROM BEGINING. Machine will reset to factory settings. NO TOOLS NEEDED. THIS WORKS FOR ALOT OF BROTHER PRINTERS BUT SOME OF THE PURGES HAVE BEEN ABREVIATED TO PRG 001.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Emilio Mazzon 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 17

전체 시간: 743