Skip to main content

2014년 9월 19일에 출시된 이 4.7” 스크린 iPhone은 iPhone 6 Plus의 작은 버전입니다. 모델 번호 A1549, A1586 및 A1589로 식별됩니다.

4683 질문 전체 보기

Screen lifting by volume up button

Hey I just recently replaced my iPhone 6 screen and it seems to have a little lift right above where the volume up switch is at. The funny thing is that the phones frame is not bent in anyway and I've seen this before on other phones why does this happen and how could I make the screen sit flush ?

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

맥북 배터리 수리 키트

기본 가격은 $69.99

Buy Now

2개의 답변

Defektive screen, I'm 99% sure.

Been working for a repair shop for almost two years now.. A while back we got in an entire batch of screens that did exactly that, the manafactures did a poor job glueing the glass down to the plastic frame, so when the phone gets warm the glass starts to seperate from the frame.

Sadly only thing you can do is replace the screen again or attempt at glueing down the glass yourself.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

The side next to the power switch is aligned?

Any way you can pull the screen and post pics? I have a couple of ideas but pics would really help. Also it wouldn't hurt to pull the screen just to make sure a random screw didn't end up under the assembly.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

blockboy21814 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 3

지난 30일: 15

전체 시간: 368