주요 콘텐츠로 건너뛰기

Third generation of iPad with Wi-Fi, released on March 16, 2012. Model Number A1416. Repair requires heating and careful prying.

183 질문 전체 보기

Some part of screen are unresponsive after digitizer replacement

Broke my front glass so I had it replaced with new digitizer.

Now after the replacement few parts of the touch screen are not responsive while others are fine.

What could this be? Even when the old glass was cracked, everything was still working smoothly.

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

PC 노트북 배터리

큰 전력 향상을 위한 손쉬운 수리.

지금 장보기

2개의 답변

It is most likely a defective part. Double check the connectors and make sure everything is tight. If any areas of the cable aren't making contact fully this can happen. If the connections are good then the part needs to be warrantied.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

There are really only a couple things this could be: A bad digitizer or the connections not being made. Clean off the digitizer connection cable and clean the connectors with 99% or 91% IPA. Make sure to check the connectors really well for damage. There is something about the iPad 3's connectors that like to break.

As always: use plastic tools and take your time. If you don't see any damage and the screen is still flaky, you know its a bad screen.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Ipadx3 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 1

전체 시간: 117