기기를 수리하세요 커뮤니티 상점

The wi-fi only version of Apple's iPad Air, model number A1474. Available in Space Gray or Silver, it packs the custom A7 processor and ships in 16, 32, 64, and 128 GB configurations.

299 질문 전체 보기

옵션

ipad air LCD not turning on after digitizer replacement

hello , i got the same problem with my i pad air 5 where screen stays black after digitizer replacement. funny thing my battery was disconnected during replacement. any ideas?

i tried reseating clips, home button and off button hard reset old digitizer also not working.

I pad is detected by iTunes and when i connected the charger the charging sound keeps beeping continuously. please advise

Update (09/15/2015)

I think I found the problem. does any one know what this part is called and how to go about it. my soldering skills are rubbish. is it a fuse of some kind. how could this have happened if I was wearing static band and battery was disconnected.

Block Image

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

The backlight filter is possibly blown. I have run into on either a mini or an ipad air, I don't remember which, a situation where I thought I had killed the backlight filter but it tested good so I put a different lcd on it and it worked. After that, I put the original lcd back and it worked fine. I never did figure out what was screwed up but it may be worth giving a try.

Gotta try the easy fixes before chasing after the board work so try a different lcd first. Maybe even disconnect the battery and let it sit for 30 minutes or so disconnected and come back to it. They're finicky.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

frankmasiko 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 5

전체 시간: 610