주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

Repair guides and support for Panasonic's Viera line of televisions.

303 질문 전체 보기

50 panasonic Viera model no.TC-P50C2 won't turn on. red light blinks

red light blinks 5 times. I have done unplugged, cleaned, & blow dried..Nothing. I also tried plugging it in a dif outlet.. HELP ..Anyone? Tammy

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 40

댓글:

different model....but did the trick....thanks

Its Friday night, tv not working, was so brassed off, thank you for the fix!!!

Thanks for providing the trick. Worked great!

My Viera TC-P42x5 would not turn on either. No lights nothing. I took the advice and held the power button for maybe a little longer than 60 seconds and it came on. Great advice thank you. Super Bowl Sunday.......

i got a panasonic tv its not turning on it just shut down and it is not turning on someone please help

44에 댓글 더 나타내기

의견 추가하세요

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

Nintendo Switch 키트

게임으로 돌아가기 위한 빠른 해결책

Nintendo Switch 키트 쇼핑하기

답변 7개

선택된 해법

Pull the plug and with the power disconnected hold the power button on for 60 seconds. After at least the 60 seconds plug the tv in and try to start it. If it works great if not , hold the power button in the on position for a count of 20 with the tv plugged in . If theres still no Joy try power with one of your volume buttons at the same time . One of these should provide a hard reset for the tv. Hope this helps

해당 답변은 도움이 되었습니까?

점수 106

댓글:

Thanks will try.

well jimfixer thank you very much you are the ruler yes

No lu ck so far. Heck the tv repair guy i hired cant ever figure it out.

First suggestion worked! Thanks you SO much...

Power + volume button did the trick for me ... I get the same issue whenever someone hits the standby button, but it will reset again, and otherwise we just turn the TV off via the main power button (which is better for the TV and power usage anyway)

105에 댓글 더 나타내기

의견 추가하세요

Do 1 & 2 together.

1] Press and hold in the on/off switch.

2] Press and hold the red button on the hand set for 30 seconds.

This will reset the PANASONIC TV.

This solution cost my £85 and the techy was in and out of my house in 5 minutes!

Robbery.

해당 답변은 도움이 되었습니까?

점수 29

댓글:

This worked a treat on mine! Thank you

Hey, was panicking, as I am hopeless with tech. Tried everything to get my tv to switch on. Eventually found your post and it worked . Fantastic advice. Really appreciated your advice!

Thanks. Rob.

really was panicking a bit but your method helped a lot .thank you mate.

THANKS !!! it worked !!! I was panicking here, Friday evening , and no tv ...

Thanks fro sharing your experience and solution with us xx

Thanks to Paul Brabbins I saved myself £85. Problem was with Panasonic TX-L32U3B in the UK. Using the remote to try and turn it on the red light would flash but never turn green. Before searching the web I tried all the obvious stuff. Paul's remedy worked first time and in less than the 30 seconds he mentions. Great! Thanks Paul.

38에 댓글 더 나타내기

의견 추가하세요

ttibal, get the multimeter out:-)

5 blinks condition can be caused by:

Missing P5V

A short of the P5V

A short of the Vda line (Note: missing Vda from the P board does not cause 5 blinks)

Wrong diagnostic by the D board

Block Image

check the voltages as indicated. Attached documents will show how to test each one of the boards for the 5 Blink error code.==>> LED-5-Blinks.pdfLED BLinks 5X <<==

해당 답변은 도움이 되었습니까?

점수 4

댓글:

i have a Panasonic TX-L50B6B,when i press the power button the green light comes on but the picture wont come on,after about 5 seconds the green light goes off and the red light comes on and starts to blink continuously

just now by leroy rowe

That's exactly what mine does. It's driving us crazy. Sometimes it takes 7 or 8 goes to turn it on.

Brilliant! Thank you. Step 1 didn't work so tried the next step and held the the power button in for 20 seconds and bingo!

Where did you find the pdf for the LEDS i have 7 blinking lights... I found a YouTube video but after the sc board is disconnected and the tv is turned back on i have a solid red light and all the videos have 6 flashing after turning tv on with disconnected sc board... So therefore it's their sc board but not mine... Need to find site for pdf... HELP ME PLEASE

I tried your 60 sec. trick, kicked right off. Thanks so much. I am saving this trick in case it happens again, but in the meantime I keep it in standby mode. Makes a good nite lite!

의견 추가하세요

You have to unplug the tv for at least an hour. (The longer the better) after that, you have to hold down the power button from the tv (not the remote) while the tv is still unplugged for 60 seconds after 60 seconds continue to hold down the power button and plug it in. Keep pressing the power button for another 60 seconds. A blue or red light depending on the model should pop up. If it didn’t work in that time frame you can try and hold it down longer.

If that didn’t work, then you have to hold down the power and the menu button on the tv at the same time while the tv is plugged in until a blue or red lights pops up and the tv turns back on.

Hope this helped you guys!

해당 답변은 도움이 되었습니까?

점수 2

댓글:

I have somewhat same issue but I'm getting no lights at all should I try the same methods

Thank God first trick work perfectly power on plus volume up yeah done the job. Thank you huge

I have the same issue with my 50 inch. It shut off by itself and the red light flashes 10 times. I have tried unplugging it, holding the power button, Power and volume buttons. Nothing.

Same %#*@ thing happened to us.... not sure what else to do. I have unplugged at the wall, held the power button down. Still yellow comes on but wont kick over then defaults to red blinking lights. Help!!!!

I have no lights, no power at all, no warning just all of a sudden shut off.tried some of these steps nothing

의견 추가하세요

i have a panasonic model th 40c400z i am having the same problems : remote wont work if i turn on tv at wall it goes on for a few seconds then turns off any help appreciated

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

I have a Panasonic TH-42PX20 that it turn off last night and it was doing the red blinks.. already unplugged and plugged get back and nothing.. can someone helppp pleaseee!!!

Update (03/25/2020)

Hi jayeff… it was blinking last night but I never counted because I didn't know what that means… so today is just staying red straight, no blinks… still not doing anything… I just unplugged it and turned it off few times today and still not doing anything.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Hi @joushy,

How many red blinks are shown?

Count the number of red blinks. It is a recurring pattern of the same number.

Hi jayeff… it was blinking last night but I never counted because I didn't know what that means… so today is just staying red straight, no blinks… still not doing anything… I just unplugged it and turned it off few times today and still not doing anything.

Hi @joushy,

Try unplugging it and then press and hold the TV's power button operated for about 20 seconds and then release the button, then reconnect the power and switch it on and see what happens.

Don't know the TV but if it has a power switch and not a push button, just do the above by operating/releasing the switch.

I'm trying to find the service manual for your particular model as they are not all the same in what the red light means

Ok Jayeff, I will try and see what happens.. I will let you know if it works... Thanks for replying.

Hi Jayeff, I tried few times but it didn't work :-(

3에 댓글 더 나타내기

의견 추가하세요

Turn the TV off, then press the TV on button and remote on button at the same time. I guarantee it will work.

해당 답변은 도움이 되었습니까?

점수 0

댓글:

Green light on then turn blinking red

의견 추가하세요

귀하의 답변을 추가하십시오

ttlbal 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 161

7일 전: 1,558

30일 전: 8,486

전체 시간: 364,714