기기를 수리하세요 커뮤니티 상점

2009년 6월 출시 / 2.53 GHz Core 2 Duo 프로세서

170 질문 전체 보기
질문 마감됨

옵션

Why is my hard drive not being recognized after replacing the cable?

I am getting a flashing folder with a question mark in it... This is even after replacing the HDD cable twice for this machine, with supposedly new parts. It boots fine off an external drive, and I have now replaced the cable twice and neither time have I gotten any love. Additionally, I should mention that I don't feel the drive spinning up when I connect the new cables (or old cable). I know the internal drive is good, because it boots other machines with no issues. Any ideas other than try a third cable?

Thanks!

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

In my experience a failed cable on this model will destroy the hard drive completely about 50% of the time. If the new cables you got did not have paper covering on the sticky surfaces they are not new. I also replace these with the widener, more substantial 2012 cable. I put pads on either side of the cable as it comes over the top to protect them from being hit by the bottom cover.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기

옵션

Just a shot in the dark but I have had times when dirt , dust has got into the conector and caused problems . That said try blowing out the hard drive sata conection with compressed air as well as the outlet on the motherboard. Hope this helps

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 10

30일 전: 14

전체 시간: 127