주요 콘텐츠로 건너뛰기

Apple's 2012 first-generation 7.9-inch iPad mini, with 16, 32, or 64 GB of storage and an A5 processor.

671 질문 전체 보기

Digitizer Not Responding After Replacement

Okay so I replaced the digitizer on a customer's iPad mini, something I have done multiple times. The home button worked but the touch functions did not. I thought it was a defective digitizer at first so I had two new ones sent to me. Both of them do the same thing. I have done multiple hard resets and reseated the cable numerous times. The jack for the digitizer flex does not look damaged. What could be the problem?

Thanks!

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 2개

가장 유용한 답변

If it was working before, and now you've ruled out the parts. Gonna guess you've damaged something in there. I just had an issue with an i6, didn't seem like it, but I must have broken the camera flex, somehow, during a repair I've done so many times

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

iPad Mini FPC Connector is a commonly damaged connector during repair. Google image it and and compare to your board to see if pins are broken.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

Franklin Marquette 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 96