주요 콘텐츠로 건너뛰기

Model A1311 / Late 2009 / 3.06 or 3.33 GHz Core 2 Duo 프로세서

286 질문 전체 보기

How do I reassemble the thermal sensor again?

In the HDD replacement guide, you state, "During reassembly, be sure that the thermal sensor connector is connected to set of pins closest to the SATA connectors."

Does that mean connect it as you did when you uninstalled it, or to assemble it another way by flipping the connector?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 1개

가장 유용한 답변

Put it back the way it originally was.

해당 답변은 도움이 되었습니까?

점수 2

댓글:

I found what your talking about but I don't get what the problem is. My fan noise is still like a jet. I know what normal fan noise sounds like, but this thing is on full blast after about 15 mins of web browsing. I checked the thermal senor wire to the HDD and all was connected correctly, the way it was before I opened it. I worked very carefully and followed the guides exactly.

I am getting frustrated being this is the second iMac in 4 days. Both doing the same thing after upgrading the drive. The tech support from OWC said that the HDD was compatible and the fan noise was due to incorrect sensor connection. After double checking, I am all out of options.

There are three different part numbers for this sensor cable:

922-9215 Hitachi

922-9216 Seagate

922-9217 Western Digital

I've never seen anything like this. What brand of drive did you get?

Hook it back up the way it was before teardown. +

댓글 달기

귀하의 답변을 추가하세요

Jon 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,303