평판: 19
3
1
I bought and replaced the digitizer, lcd and plastic frame on a friend phone and now the screen keeps shutting off within a second of turning on unless it's pointed at a light source. Any ideas?
좋은 질문 입니까?
평판: 55
2
1
I had almost the same problem. I had forgotten to transfer a small rubber piece (wrapping the front proximity sensor, between upper speaker and front camera) from the old frame to the new one. So the proximity sensor was not working at all (you can check that using mini OS https://www.youtube.com/watch?v=XPKL1U94...) and caused weird behavior on screen locking.
After having transfered this small piece, everything works fine.
해당 답변은 도움이 되었습니까?
Yep that was it. Ty
평판: 1.1k
3
2
3
When working on this Phone one thing to remember when installing the new Screen is the metal mesh that covers some circuits on the flex cables. when the mesh is not there it causes the circuits to short when they touch the motherboard that goes over them. Also could be a damaged flex cable, the cables on the LG G4, G3 and G2 are very thin and hard to place in just the right spot on the frame.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 328
