주요 콘텐츠로 건너뛰기

Model A1224 / Mid 2007 및 Early 2008 / 2, 2.4, 또는 2.66 GHz Core 2 Duo 프로세서

548 질문 전체 보기

No Power, #1 LED Stays lit, #'s 2&3 LED's flash

I have an Intel iMac 20", Model A1224, 1gb RAM, that one day just stopped turning on. I opened it up and checked the diagnostic LED's on the board. #1 stays lit. #2 and #3 blink on and off. #4 doesn't light up at all.

When I press the power button on the back of the black, plastic case, the internal fans will attempt to spin, but will not spin. (They rotate *maybe* one (1) degree out of the 360 degrees they would spin.) I can hear a high-pitched sound--kinda like a whirring sound--coming from the power supply when this occurs.

I have attempted to reset the SMC with, seemingly, no effect.

Any advice would be much appreciated.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 3
댓글 1개

I have the same exact issue. Replaced the power supply and 2&3 are still flashing. Did you find out the problem?

댓글 달기

답변 2개

선택된 답변

The blinking indicates a RAM problem. First reseat the RAM. If that fails try one stick at a time in each of the slots.

해당 답변은 도움이 되었습니까?

점수 2

댓글 1개:

Excellent low cost suggestion. +

댓글 달기

Seems that the power supply has gone. #1 LED indicates trickle power, it's always on when the computer is plugged in and supplies 5V to the logic board. Whe #2 and#3 are blinking it means that CPU and GPU can't be initialized. Usually a (don't know the english term for it, i try ;-)) power store diode is gone on the power supply. You can check it but be careful. Leave the machine unplugged for at least 24H cause the capacitors can store a lot of voltage.

Good luck.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Installed a new Power Supply. #2 and #3 LED's are still blinking. Any other thoughts? Thanks.

I have the same problem. I also changed power supply and the problem still there. Any answer?

댓글 달기

귀하의 답변을 추가하세요

Plumberman010 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 3,104