이 사용자는 아직 프로필을 작성하지 않았습니다.
질문
I have a MBP from a customer which had the logicboard exchanged recently (NVIDIA issue). Customer complains that the USB...
더 읽어보기Hi, i've already read the related answers but that doesn't adress my problem. As i stated, the sensor sometimes switches...
더 읽어보기My nuclear reactor is overheating due to the lack of electrical power to run the pumps. What is the best measure to take?
더 읽어보기My girlfriends Win7 machine started acting up lately. Firefox kept crashing, espacially with Flash plugins running...
더 읽어보기I have the metioned iMac here where i replaced the optical drive. I tested it (with the front bezel off) and everything...
더 읽어보기Sorry but i have to mention this. This site i always understood in a matter like "help yourself, then help others". It...
더 읽어보기There is a lot of discussion all over the web about it, but i couldn't find a solution yet. When i try to erase or format...
더 읽어보기The power LED lights up, drawer works perfekt, i can hear the disk spinning inside. But nothing on the display and no...
더 읽어보기답변
You can exchange single keys, providing you have access to a 2011/2012 US keyboard. The little siccors under the keys are different to the 2010 and earlier models. A topcase replacement with the proper american (small) Enter key would be the most expensive option.
더 읽어보기Its a 4 point ZIF socket, but I don't know where to purchase one. Even if you get one, maybe salvaged from a busted board, it'll be still a !#*^ of a job to solder it on. You can always fit the keyboard sans backlight.
더 읽어보기The superdrive is connected via SATA. There are companies selling drive bay kits, just google it. IMHO it is better to replace the startup disk with the SSD, put your system and apps on it and put a beefy data disk in the optical drive bay.
더 읽어보기Disconnect the power cord. Remove the user access panel from the bottom of the computer. Press the PMU reset switch once on the bottom side of the logic board. Do NOT press the PMU reset switch a second time because it could crash the PMU chip. The switch is near the memory slot, next to the airport card. Wait ten seconds before you connect the power cord and keep your fingers crossed.
더 읽어보기You'll have to find out wether the machine charges the battery at all. If you have access to a multimeter measure the charging pins. The two outer ones are gound, the three inner ones should read something around 3.58 V each. If that is not the case you'll have trouble with the SMC (more likely and more troubling) or the DC in (Magsafe) board which is rather unlikely since your machine powers up on AC.
더 읽어보기Great Guide to removal of the glass here. The spare parts you might find on ebay.
더 읽어보기I suspect a broken screen and/or LVDS cable.
더 읽어보기Sometimes the little cushion on to of the LVDS (video) cable causes issues. Try if removing it solves the problem.
더 읽어보기I swap drives all the time and it always works. When you start up a foreign drive the boot time is a bit longer but you should be alright. I have a bunch of test disks with systems on that i use for troubleshooting and never ran into problems.
더 읽어보기Seems like your backlight is broken, as you already suspected. You'll might a secondhand screen on eBay a little cheaper.
더 읽어보기45 페이지 중 1
remacberlin
@remacberlin
13,317
평판
448
해결책
0
안내서
회원 가입일 04/22/10
re-mac is a small company dedicated to keep old macs and other gear running.
www.re-mac.de
투표
166
3