주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

AirPort Extreme 베이스 스테이션과 함께 출시된 이 하드 드라이브 장착형 제품은 Time Capsule NAS에 802.11ac 속도를 제공합니다.

52 질문 전체 보기

Cables connection for the LED indicator lights

Hi all,

I messed up my LED indicator lights by accidentally pulling out all three cables from the socket connector.

It is now showing amber all the time, instead of bold green as i have given up trying which cable goes to which.

How can I know which cable go to which?

There are three cables altogether for the one led at the front of the time capsule.

Tks in advance.

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 3개

가장 유용한 답변

I have mine open right now so I can easily tell you in about 4 hours when I get home.

BTW, the connector lifts out perpendicular to the logic board, unlike the million others that look exactly like it which pull out horizontally.

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Sorry I was unable to help last night. Yep, perpendicular, as in lift it away from the logic board towards the white plastic instead of towards the open air. You'll need a tiny spudger to move the connector and not the wires. Actually pulling it by the wires will damage the connector and wires even more. The wires are brittle so don't bend them any more than necessary.

의견 추가하세요

these are the three cables, and I have coloured them, blue been left most, middle no colour, red right most.

Please advise me what is the right arrangement for all three cables.

Tks!

Block Image

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Tks man, if you can just advise where the middle cable should go and I can easily test the other two by interchanging one another.

perpendicularly?

meaning pulling them upwards is wrong? arghhhh... I should have checked.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

laich 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 261