Hi I've replaced the battery and the fan, after 2 or 3 attempts it fired up to desktop, I set the time and date and then the cursor froze and it started overheating. I turned it off and started process again but now it struggles to turn on.
I can hear the fan but if left too long it gets hot. Its a 2010 model. Any suggestions would be very welcome.
좋은 질문 입니까?
평판: 685.3k
3.4k
1.1k
2.6k
Disconnect the hard drive and cable and boot from the original system installation disk and report your findings.
해당 답변은 도움이 되었습니까?
평판: 1
2
try to remove the RAMs and unplug the battery with the magsafe unplugged press the power button for 15 seconds then plug every thing back again and reset the PRAM and the SMC.
it worked for me hope this will help you.
good luck
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 0
30일 전: 0
전체 시간: 96
댓글 4개
oh sorry, its a MacBook pro 13"
Crystalclear 의
Can you give us the year, or better yet, can you give us the full serial number so we can correctly identify your system.
Dan 의
Its a 2010 model.
Crystalclear 의
What made you replace the fan? Also boot the mac holding the shift key, then report back.
John 의