기기를 수리하세요 커뮤니티 상점

처리 속도가 빨라진 iPhone 3G 개선 버전. 이 기기의 수리는 3G와 유사하며 간단한 스크루드라이버, 비집는 도구가 필요합니다. 모델 A1303 / 16GB 또는 32GB 용량 / 검정 또는 흰색 플라스틱 뒷면.

1500 질문 전체 보기

옵션

iPhone 3GS housing replacement advise

Hi,

I would like to replace the housing on my 3GS which is cracked badly. I do have couple of questions.

The bezel looks fine and i would like if possible to replace only the back housing. I have bought a back housing for the iPhone 3GS without the bezel and without camera plastic and headphone ring.

This is the item i got :

http://images.channeladvisor.com/Sell/SS...

1. Is it possible to move the bezel from the old one to the new housing with a nice result ?

2. Can the headphone ring be moved the new housing ?

3. I found pictures that the camera holder can be moved to the new housing very simple, same with the ring for the camera. Is it true ?

Here is a pic of Headphone ring and camera holder.

http://imgs.inkfrog.com/pix/szhousing200...

I do know there is housing with bezel and all the mentioned parts mounted already so no need to buy those but now i got the housing without those so let's keep it to what i got.

I would like people who have done this and have experience to answer me. I want to know if the result can be good in the end by doing all this ?

thanks in advance

donnib

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 3개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

you'll need to scrape out all the old adhesive from the bezel as there are little plastic prongs that click into the bezel from the back case. if you skip this out it the 2 pieces will have a gap and it will look bad.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2
댓글 달기
가장 유용한 답변

옵션

You can remove the bezel, its glued on so you will need to glue it to your new one I used a strong flexible glue, super glue is not a good idea. The other two rings will come off the you should get away with just pushing them where they need to go in the new one - they have a mild adhesive on them and they had enough to stick into their new home. If you take care its easy.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 2개:

@Ben: which glue did you use/do you recommend? I saw others using Super Glue, but I am a little bit sceptic.

의

I used Unibond Repair Extreme Power Glue. Its a flexible strong glue basically, I wouldn't use super glue personally.

의

댓글 달기

옵션

just an fyi: krazy glue gel works just fine, strong bond, and no mess. standard liquid krazy glue is a no-no tho.

i have installed two back housings, mine and my lady's, both were difficult and tedious but well worth the effort.

i wish i could be more help but as with most things in life, you gotta fall on your face a few times before you learn to walk..

try to do the install and you'll get thru it :)

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Mihai 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 16,677