After replacing UEFI BIOS chip does not start the installation.
Hello, I replace the BIOS chip because my client don't remember the EFI password and now with the new BIOS doesn't start the installation. The computer is too low. I put a new installation finished in USB hard disc and start but in a few seconds only appears the Apple logo and don't do anything. I replace with two BIOS and do the same. The apple test appears GOOD. Please help me. Thanks.
좋은 질문 입니까?
댓글 2개
if you got that far, sounds like you just need to do a normal system restore, use the WIFI to download the OS and let it install the latest update on to that imac, but before doing this , you might want to go to disk utilities and ERASE your entire SDD or HDD so it can be a CLEAN fresh install ...
ricado 의
Failed bios chip install. This is a VERY delicate procedure and if not done with the absolute correct tools you can lose USB boot-ability, CPU gets iverheated, tons of weird stuff. Send it to a pro who dies this for a living. Each bios is flashed based in the machines HASH code....
Lane Jasper 의