주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3934 질문 전체 보기

Will not slide to unlock

When I try to slide to set up my iPhone 5s it doesn't respond. I've done the hard reset and nothing works. It also says hello in the center of the screen and where it says 'hello' and 'slide to set up' it keeps changing to different languages. Please help!

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

1개의 답변

I'm assuming you've waited for a while - sometimes they won't respond for a 30-60seconds or so after booting. If so, the digitizer is not working on the display. It could be a faulty display, but often it's just that it got disconnected. Follow these instructions steps 1-15. Notice the last thing you disconnected was the digitizer. Check the cables and connectors for dirt or pieces of glass or similar that could sit inside and keep the connector from fully seating - clean it out with air and/or alcohol swabs. Then click the cables back on the connectors in the reverse order of steps 13-15. You can now turn the phone back on and see if it's working. If it is working, make sure you have some not-conductive spacer on the back of the connector before you reassemble (see the foam in the pictures above - that puts pressure on the cable to keep it from popping off, and replacement screens often don't have it).

If it still isn't working you have either a faulty screen or a more serious problem on the logic board.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Wes Jones 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 143