주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3486 질문 전체 보기

Stuck in a reboot loop after repair

I put a new frame on my iPhone 5s and put it all back together. I had it working except the screen didn't want to rotate so I took the front screen of again to try to solve these problems. I reconnected the LCD cables and home button and now I am stuck in a reboot loop, and my screen has a horrible line down the middle. I have had this problem before and I figured out it was just the screws being in the wrong holes on the LCD cable shield. I had the screws in the right holes but yet I am still in a boot loop. I currently have the shield remove from my iphone and it's still in a boot loop and it won't restore on iTunes. I have also tried Reiboot and it didn't work. On iTunes I keep getting Error 9 or the device can not be found. Please help!

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1
의견 추가하세요

답변 1개

가장 유용한 답변

I would remove all the screws from the board to see if something is causing a short or flexing it. Can you test the device with a different screen?

해당 답변은 도움이 되었습니까?

점수 1

댓글:

I do not have a different screen to try but I will try to remove some screws

의견 추가하세요

귀하의 답변을 추가하십시오

beeweezy18 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 118