Skip to main content

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3870 질문 전체 보기

Wont turn on after lcd replacement

I have changed the lcd and now it won't turn on. the issue is now that it won't turn on again. when connected to iTunes it is recognized as "the phone you are trying to activate needs a sim card to activate. or this item does not exist. When connected to charging cable it vibrates to times with 5 sec. interval.

the repair is not new to me, i have done this repair many times.

i have tried to mount an other lcd with the same result. I can read, that some threats describe the it could be issues with CPU. Does any of you have experience with this issue?

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

아이폰 배터리 수리 키트

Only $29.99

Buy Now

아이폰 배터리 수리 키트

Only $29.99

Buy Now

3개의 답변

선택된 해법

The constant vibrate is the phone telling you it can not see a display. Look for a damaged digitizer connector or screw damage down the flex cable retaining bracket screw holes.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요
가장 유용한 답변

I know I say this a lot, but have you tried a force restart?

How to Force Restart an iPhone 5

해당 답변은 도움이 되었습니까?

점수 2

댓글:

But that reset does resolve a lot of issues with the iPhone

의 답변

Yes. I have tried hard reset several times. And I have tried to boot in dnu mode

의 답변

Hmm. Sounds like the phone is on and active. It's starting to sound like there's an issue with the sockets on your logic board. You sure your old LCD doesn't work? So we can rule out our new LCD being the issue?

의 답변

의견 추가하세요

Hi Imedic

thanks a lot for your replies. i have also tried with more than one lcd on this phone. i have also tried to change the charge port and jack component. do not know what next step to take, all ideas are welcome.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Carsten 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 84