Black bits on the connector pulled off during Digitizer replacement

Question

iPad 3 4G

Third generation of iPad, featuring 4G capabilities, released on March 16, 2012. Model number A1430. Repairs require heat and careful prying.

106 질문 전체 보기

J Lefo @juux

평판: 9

1

게시일: 2016년 2월 18일

옵션

Black bits on the connector pulled off during Digitizer replacement

Hi all,

I'm trying to replace the touch screen on my iPad3 after I broke it.

When trying to remove the tape that was between the connector and the digitzer ribbon, the black bit on top of the connector came out with the ribbon...

See pictures here:

Picture 1

Picture 2

My question is: is this black bit important or can I replace it with something else or do I need to change the connector?

Thanks for your help

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

답변 1개

선택된 답변

Mimi @imimimobile

평판: 2.3k

7

5

1

게시일: 2016년 2월 18일

옵션

Hi J

You can try to put it on the top and seal it with something and see if it is going to work. If not you can replace the connector or just try to repair it. But this need to be there to make the connection.

Hope this help

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 8개:

Hi Mimi,

Thanks for your answer. You mean put some black tape on top of the connector to replace the missing part?

J Lefo 의 2016년 2월 18일

If you still have the part you need to try to put it in place like that the connections will merge. If you don't have the broken part just tape won't fix the problem you need to replace the connector or find the missing piece and put it back in place.

Mimi 의 2016년 2월 18일

Great! Thanks a lot for your clarification

J Lefo 의 2016년 2월 18일

No problem here to help.

If my answer is what you are looking for please mark it as answer accepted.

Thanks

Mimi 의 2016년 2월 18일

Last question though, do you know a nice tutorial explaining how to change the connector or how to repair the top bit? (Can't find any good one google...)

Many thanks

J Lefo 의 2016년 2월 18일

댓글 3개 더보기

댓글 달기

Hi Mimi,

Thanks for your answer. You mean put some black tape on top of the connector to replace the missing part? — J Lefo
If you still have the part you need to try to put it in place like that the connections will merge. If you don't have the broken part just tape won't fix the problem you need to replace the connector or find the missing piece and put it back in place. — Mimi
No problem here to help.

If my answer is what you are looking for please mark it as answer accepted.

Thanks — Mimi
Last question though, do you know a nice tutorial explaining how to change the connector or how to repair the top bit? (Can't find any good one google...)

Many thanks — J Lefo

iPad 3 4G

Black bits on the connector pulled off during Digitizer replacement

답변 1개

귀하의 답변을 추가하세요