메인 콘텐츠로 스킵하기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

1970 질문 전체 보기

Black screen but phone is still on

Ok so someone did the 1970 date thing on my phone so i opened the phone and disconnected the battery and that worked but my front camera and earpiece stopped working so i ordered a new proximity cable and after i changed that the screen went black but i still hear alerts and vibrations so its still working but i cant see anything. Whenever i do a soft reset after it turns on for a split second but then goes black again

해당 질문 답변하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Same issue on my iPhone 6. At first it was blank, and the battery is drained to 2.95 V now. I have no idea what is happening.

의 답변

의견 추가하세요

1개의 답변

가장 유용한 답변

When you took off the flex cable metal cover for the LCD, front flex cable assembly. Did you put the screws back properly?

It looks something like this:

Block Image

The long screw always go on the top right of the metal plate, while the small screws go on the other screw holes. If you put the long one on the board one. You most likely have cut the circuit lines on the mainboard that connect to the backlight IC or etc.

Not sure if this is fixable. It is on the iPhone 5 and 5s at least. I think a mobile phone specialist re-wire's the broken circuit.

Sounds like backlight IC / fuse is blown. Go to a mobile phone technician to get it repaired / replaced.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

Michael youell 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 906