주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2503 질문 전체 보기

Replaced LCD Assembly, Fingerprint messed up.

Good Evening from Rainy Cali!

I got an iPhone 6, shattered screen, visible LCD, all features working as intended. otherwise. I replaced the LCD Assembly with one from Laptopscreen.com

https://www.laptopscreen.com/English/mod...

I gently removed the existing Home Button and Metal Plate-Cable Combo, transferred them to the new LCD Assembly, and reassembled, along with the Cams, etc.

The phone works with two exceptions: both involve a Wonky Fingerprint button.

A) The Fingerprint Sensor does not respond. Fingerprints are not found on the phone, attempting to make new ones instantly goes to "Failed, there was an error enrolling fingerprints."

B) The Home button cannot wake up the phone and bring it to the lock screen, But once unlocked, the home button works for changing between apps, getting the Apple Pay card to come up (but not pay, no fingerprint.)

Anyone heard of this crap before?

PS...I was Using a 24x24 Antistatic Mat, a Wrist Strap, both connected to a Banana Junction, which then runs to the Center Screw of the Electrical Wall Outlet using Size 5 Ring terminals on 12 gauge wire, using the ESD safe Blacksticks, and wearing two black Nitrile Gloves, dressed wearing all cotton dickies shirt, Carhart cotton socks, and Bamboo-toe shoes, while listening to the Lord of the Rings Pandora station - All the Apple service tech requirements were met, to the best of my knowledge. ;)

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Is this for 6 or 6S?

의견 추가하세요

답변 2개

선택된 해법

UPDATE: The problem has been solved. The Flex Cable that goes from the Logic Board to the Fingerprint/Home Button was successfully replaced, with minimal fuss, and it solved the problem.

Here's the part that solved it:

http://www.amazon.com/gp/product/B00XN9Z...

That flex cable is SO delicate, it's not even funny.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요
가장 유용한 답변

Was the previous screen cracked around the home button? The reason I ask is that I have had a similar problem a while back and found it to be small shards or glass that where actually in-bedded in the backside of the home button that mates with the backing plate that holds the home button in place . Dont know how I managed it but it did cause the problem and once removed had my joy back . Give it a look and hope this helps

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

Kevin McCartney 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 134