주요 콘텐츠로 건너뛰기

2015년 9월 25일 출시. Model A1688/A1633. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 6, 64, 또는 128GB / 은색, 금색, 스페이스 그레이 및 로즈 골드로 제공하였습니다.

2690 질문 전체 보기
질문 마감됨

camera and cellular not working after dropping the phone

My iPhone 6s has dropped. Since then, the back camera didn't work anymore. After opening it, I noticed the camera bracket was a bit blue - probably caused by heat. So I assumed there was a short circuit.

I replaced the camera but it still didn't work. Also, the cellular wasn't working any longer.

Then I replaced the Lightning connector flex cable, assuming that caused the cellular problem. But it didn't.

So I take it the problem is caused by something else, but I have no clue. Could it be the motherboard?

Many thanks.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

I know sometimes depending on the fall that the power management chip on the mother board gets a cold solder which cause some functions of the phone like antenna signal problems.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 102