기기를 수리하세요 커뮤니티 상점

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

2522 질문 전체 보기
질문 마감됨

옵션

iPhone 5 gas gauge repair try without micro soldering

After reading iPhone 5 randomly crashes & reboot, battery fine. I've found out that my iPhone will almost for sure have the same Problem.

My attempt was to try it without soldering. It's probably easier to replace the whole circut board, rather than soldering the fl11, or am I wrong there?

Not the eco friendliest way, but it's still better than throwing the whole thing away.

After some research around my area, I've found few iPhone's which are also broken and really cheap.

My main question now is, can it also be an iPhone 5s or iPhone 5c?

Should I also replace the battery or will replacing the circut board do just fine?

Thanks in advance.

- Max

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hey Max,

iPhone 5, 5s and 5c logic boards are all different (If that's what you meant by your question).

Also.. Boards are locked to a certain carrier, so if you find a good board/same carrier, it should work fine. The battery should be ok as long as the connector is not botched or you tear it during removal. it's kind of a hit and miss situation because you have no clue what issues are present in the broken phones.

Now if it where me, I would send it to Jessa at iPad Rehab to get the battery connector fixed.

http://www.mendonipadrehab.com/

해당 답변은 도움이 되었습니까?

예 아니요
점수 1

댓글 1개:

Thanks for your reply @lscs.

Yes I meant that.

Finding an iPhone with the same carrier in Germany shouldn't be that hard, but it'll probably be harder to find an broken iPhone 5 with the same carrier.

I'll see what I can do and will post the result when it either worked or was an miss.

의

댓글 달기
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 389