주요 콘텐츠로 건너뛰기

2012년 9월 12일에 발표된 여섯 번째 Apple iPhone입니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 검정색 또는 흰색으로 제공하였습니다.

3372 질문 전체 보기

What is wrong with my replacement screen, not popping into place?

Block Image

Hi

Block Image

Block Image

Block Image

, can someone please view my pictures of my iphone, its a sprint 5, the top left corner and half of the left side is not popping into the frame correctly.

when i look at the top "tabs" it looks like the one on the left side just is worn or not as "lipy"...could this be the problem or something else? if you look at the pic of the top, youll see two little indents, there supposed to be one on the left too but its not a prominant looks like it wouldnt catch.

ive also done what i can do to make sure nothing else interally is out of place and stopping it from locking in

everything does work.

thank you

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
의견 추가하세요

답변 1개

선택된 해법

Have you made sure these taps are not like pushed down so that the metal housing frame of the iPhone 5 can clip in and hold the screen? If they are pushed down then you need to push them back up so it has enough space for the tabs to clip in.

To put the screen in you need to start from the top where the tabs are make sure they hold in first then start working you way to the bottom.

Now if the frame is damaged or dented in some way that makes it a bit hard to put in you will need to get the top in first then the bottom then the middle. You need to be very careful doing this though so this way is not recommended but should only be used as a last resort. You may need one of those razor blades to get the bottom one clipped in this case.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

Dylan Carter 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 77