기기를 수리하세요 커뮤니티 상점

The second generation HTC One—dubbed the HTC One (M8)—features a dual flash and the new Sense 6 UI, and was released March 25, 2014.

202 질문 전체 보기

옵션

What board should I use for replacement?

I currently have a Verizon HTC One M8 (HTC6525LVW). While trying to fix a gps issue (bend antenna to make better contact with case), I snapped off the little antenna for the gps.

Block Image

It's located on the daughter board on the top of the phone, so I'm guessing that I need to replace the whole daughter board. When shopping around for boards do I have to go with the exact replacement for my Verizon model or are they interchangeable between carriers/models? I have found a few from China that don't offer a model number and only list compatibility as "HTC One M8". After replacement will this affect any of the firmware currently on the phone?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Wow, this was old but I found this since I have a similar issue.

If you have the tools and the skill, you can solder a small wire where the antenna used to be. Make sure it's long enough to make contact with the case but short enough so not to get interference.

If that fails, replace the daughter board. They aren't horribly expense

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Chris Campbell 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,160