주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Repairing an I nconsistent home button

My home button has become more and more inconsistent. It now requires me to push only the lower-left edge with just my finger nail. While uttering a short prayer. In a circle of candles.

I purchased a new button from iFixit and had the beastie apart when I thought I'd try reseating and reassembling the device. To my pleasant surprise, it worked. For a short while. The problem is rapidly growing worse again after less than a day of use.

I'm looking for any suggestions on troublshooting/repairing the actual button so I don't lose my fingerprint sensor. Any ideas?

Thanks!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

Start with removing the bracket holding the home button in the glass. See how it looks. It should look like this.

Block Image

The four solder pads around the edges will need to be desoldered to replace the home button tactile switch by itself. If the black dot looks super worn you could try to bend the center of the bracket towards the home button. If not, the switch will have to be replaced.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

landofiz 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 3

전체 시간: 73