주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

Where is the external reset button on the tablet?

Brand new tablet was working fine but I disconnected from docking station and screen went blank. I can tell power is on and when plugged back into the soft docking station and I turn the caps lock button on the lite indicating caps lock turns on. Nothing on screen. manual says to press a pin into the hole to reset. me and my son examined and no hole can be found. Someone said next to audio connector but there is non on this model. Has Windows 10,

이 질문에 답하세요 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 2

댓글:

I have a Spring 8 HEXA tablet, i think it is in Boot Loop mode and i can't get it to turn on and my keyboard want come on also, what can I do to fix the problem

의견 추가하세요

답변 6개

가장 유용한 답변

Hi

You need to hold the "Power" & "Volume" up (+) buttons simultaneously for 20 seconds until the penguin image appears in the upper right hand corner. 4. Once this image appears release the "Power" button while continuing to hold the "Volume" up (+) button. 5. After a few seconds an image of an Android on his back will appear. Once this image is visible, press the "Power", "Volume up (+) & "Volume down (-) buttons simultaneously...only once. 6. Next your device will go into "Recovery Mode", use the "Volume" up & down buttons to navigate the parameter. 7. Scroll down the list of options and use the "Power" button to select "Reboot System"

reset buttons dont work no more if its android!

happy pressing ;-)

Ray

해당 답변은 도움이 되었습니까?

점수 4

댓글:

he said, has window not android, jesus!!!!

This worked great thanks!

Even though he said android it still works on the windows 8.1 tablet. I am so happy that my tablet works again thank you soooo much.

의견 추가하세요

I have tried everything. Nothing works

Model# EWT935DK

1-NO RESET BUTTON.

2-HOLDING DOWN VOL. BUTTONS THEN/AND POWER IS A BIG WASTE OF TIME

THERE GOES ANOTHER 125$ DOWN THE DRAIN.

NEVER AGAIN WILL I BUY SUCH A POS!

VERY !#^&@@ OFF!

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

My tablet stays on the ematic powered by Android screen

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

I have the Windows 10 eMatic EWT935DK, and it will no longer boot into Windows. It was at the login screen for the PIN and I could not enter it because the docked keyboard doesn’t work and the touch is mapped incorrectly on the screen. rebooting got it to attempt startup repair, and it failed, repeatedly. Attempting to boot from a Win10 USB drive with no luck. I held down all 3 buttons and got to a screen with options of - “Continue”, “Boot Manager”, “Device Management”, “Boot From File”, “Secure Boot Option”, and “SCU”. All were under blue/white icons. “Continue” and “Boot From File” flash when I use the volume up or down button to change between them. I can’t seem to select any other icons and I don’t know how to enter as the power button does nothing until it is held for some where around 10 seconds, then the device powers off.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

This wasnt my workings but it was from another guy “Botch Job Ray“ i am just reposting it becuase it was very helpful. Also even though it says android it still works for windows 8.1. If you follow the directions exactly it is sure to work.

You need to hold the "Power" & "Volume" up (+) buttons simultaneously for 20 seconds until the penguin image appears in the upper right hand corner. 4. Once this image appears release the "Power" button while continuing to hold the "Volume" up (+) button. 5. After a few seconds an image of an Android on his back will appear. Once this image is visible, press the "Power", "Volume up (+) & "Volume down (-) buttons simultaneously...only once. 6. Next your device will go into "Recovery Mode", use the "Volume" up & down buttons to navigate the parameter. 7. Scroll down the list of options and use the "Power" button to select "Reboot System"


해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

My EWT935DK came from factory with W10-32 on it. There is no penguin logo displayed anywhere, anytime which is not surprising. The Penguin icon belongs to LINUX of which ANDROID is based. There is no reset hole next to headphone jack or anywhere else. An ANDROID style reset ..... volume + and pwr does not work on my device. Simply works just like pwr only does.

So, it would be great if someone knows how to do a factory reset for this specific device. Ematic's user guide says there is a reset hole .... there is not. Their tech support is non existant.

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

wbfox1978 가/이 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 7

7일 전: 29

30일 전: 115

전체 시간: 7,775