주요 콘텐츠로 건너뛰기

Apple iPhone 5s는 2013년 9월 10일에 발표되었습니다. 수리는 이전 모델과 유사하며 스크류 드라이버 및 비집는 도구가 필요합니다. GSM 또는 CDMA / 16, 32, 또는 64GB / 은색, 금색 및 스페이스 그레이.

3530 질문 전체 보기

Flashlight not working after screen replacement

So, a friend brought me his iPhone 5s because he knows I like to play with this kind of stuff.

His phone had the screen shattered. So, I ordered a new one, and tried to follow the instructions but I had a few problems during the repair.

1st, There was four connectors under the bracket, 3 of them came from the display (I think they were, digitizer, camera and earpiece and lcd) and one that I dont know.

The one that I don't know where it comes from was accidentally disconnected with my prytool and I had a hardtime trying to get it into place.

I finally got it into place and could turn the phone on. Screen ok, digitizer ok, touch id ok, front camera ok, earpiece, proximity sensor, everything seemed ok.

1 day later he called me. His volume button is not working properly, he cant raise the volume, only lower. And the flashlight is also not working.

I must admit I forgot to test the flashlight, but the volume rocker I did, and it was working just fine.

What should I do now?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 1

댓글 1개:

The 4 cables are Camera, Digitizer, LCD and camera+earspeaker

댓글 달기

답변 1개

Hi,

The 4th connector was right above the other 3 connectors right ? then it was the camera flex. tell him to try his camera. Maybe you only damaged the few wires of the flashlight.

For the volume buttons, i don't know, you should check them

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

henzpedro 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 1,758