주요 콘텐츠로 건너뛰기

The Canon Selphy CP910 is a compact printer that connects to a camera, computer, and mobile device through a WiFi connection. It is the 34th generation of its kind in the Selphy printer series created by Canon.

13 질문 전체 보기

Inaccurate "Paper size is incorrect!" message

Although I have reloaded with Canon KP-108IN paper, I get the message that the paper size is incorrect and my photos are not printing. The paper goes through but exits unprinted.

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 24

댓글:

This solved it for me too

의 답변

Finally!!! Found something that worked. I just used an alcohol wipe. Thanks.

의 답변

This solved the same problem I was having!

의 답변

It works for me too. Thanks a lot!

의 답변

Thank you! it worked, saving me $$$$ in paper, supplies and antacids! you totally rock!

의 답변

2에 댓글 더 나타내기

의견 추가하세요

4개의 답변

선택된 해법

I had the same problem after turning on the printer for the first time after several months of not using it. Finally the solution was cleaning the little gray rolling parts that pull the paper in. After having removed the dust it worked like a charm.

해당 답변은 도움이 되었습니까?

점수 22

댓글:

Wow....it was solved and worked perfectly! Many thanks :)

의 답변

Worked perfectly.. Thank You

의 답변

this solve my problem after months of trying to figure it out, many thanks

의 답변

How did you clean the rolling parts?

의 답변

This did not work for me. IT is the very first time I am using it. UGH

의 답변

12에 댓글 더 나타내기

의견 추가하세요

Unfortunately for me this fix didn't cure the problem as I still received the error message and on re inserting the cartridge I sometimes got an alternative message that no cartridge was inserted. The latter message gave me a clue and I assume that the retaining catch (brown above cartridge) can become sloppy with age. I tried pressing the cartridge in with my finger retaining pressure for the printing and it worked a treat. I will investigate further to check if there is anything inside the printer preventing the cartridge from lodging automatically but otherwise I may attach something to the cartridge door flap to ensure the cartridge is pushed fully home. Give it a try if cleaning the rollers doesn't work for you - good luck

해당 답변은 도움이 되었습니까?

점수 1

댓글:

Just get out the Panel (housing the power input and Card readers) and clean it with Gasoline, dry it our and put back the Panel, it will work I just did it now and it worked for me.

의 답변

의견 추가하세요

OMG. This helped me. I thought my ink was old or something, but was getting the wrong paper size message. Hadn’t used it in a long time. Had a few cat hairs in the opening. Used alcohol and lint free cloth to wipe down and pulled individual cat hairs out and tried again. It Worked!! I didn’t think it would!

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

Worked perfectly for me!

해당 답변은 도움이 되었습니까?

점수 0
의견 추가하세요

귀하의 답변을 추가하십시오

Patricia F Fong 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 29

지난 7일: 209

지난 30일: 866

전체 시간: 27,840