Headphone Jack/Speakers not working

Question

MacBook Pro 13 "Unibody Late 2011

2011년 하반기 모델, A1278 / 2.4 GHz i5 또는 2.8GHz i7 프로세서.

591 질문 전체 보기

Kyle C @kylec22765

평판: 33

3

게시일: 2016년 8월 20일

옵션

Headphone Jack/Speakers not working

Hi guys, I recently bought a Macbook Pro late 2011 from eBay, and it sure has seen better days. There is no sound at all and resetting the Nvram and SMC did not fix it. The headphone jack also does not output any sound. When I check the sound preferences, there is no output and input detected. The only way I can get sound output is through bluetooth. Also one of the usb ports is not working.

The seller claimed to have no water damage, and upon further investigation on the logic board, there really isn't any corrosion.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 2개

선택된 답변

Dan @danj

평판: 479.4k

Self employed contract worker

35

329

971

게시일: 2016년 8월 21일

옵션

The headphone jack has a switch inside which directs the output to either the headphones or internal speakers often it gets damaged. The other possibility is the Codex chip is blown. In this case I'm suspecting the later here as you state the Sound preferences Output tab is not showing the Internal speakers or the Input is not showing the Internal Microphone and/or the Line In, double check if that is correct.

As for the USB port I would try a powered USB hub which then you connect something to test it to see if the power services are gone Vs the USB driver logic. If the device responds on the dead port then you have a simple fix a blown fuse link.

Both are repairable, but, you'll do need to have micro soldering skills and the proper tools and access to the needed parts.

I would recommend you locate someone with these skills to service your system or replace the logic board your self.

해당 답변은 도움이 되었습니까?

예 아니요

점수 3

댓글 2개:

Okay, I tried the usb hub and the little led lights up but when I connect my iPhone to it, no data is transferred to it, or even power. But when I do the same on the other usb port, it works. As for the sound, I think I may be sol, and might just upgrade to an early 2012 logic board for usb 3.0.

Kyle C 의 2016년 8월 22일

Are you sure the USB hub was powered? That is it was plugged into its own AC to DC transformer.

If not that's what I would expect as a reaction as that doesn't change things. If it was powered then you have a bigger board level problem so then it would make sense to replace the logic board.

Dan 의 2016년 8월 23일

댓글 달기

Okay, I tried the usb hub and the little led lights up but when I connect my iPhone to it, no data is transferred to it, or even power. But when I do the same on the other usb port, it works. As for the sound, I think I may be sol, and might just upgrade to an early 2012 logic board for usb 3.0. — Kyle C
Are you sure the USB hub was powered? That is it was plugged into its own AC to DC transformer.

If not that's what I would expect as a reaction as that doesn't change things. If it was powered then you have a bigger board level problem so then it would make sense to replace the logic board. — Dan