평판: 333
8
35
1
Pushing the white levers outward to pop out the RAM has now failed - the chips are still embedded in their respective slots.
I fear that repeated insertion and removal of the RAM has eroded the plastic which would eject the chips.
What should I do to remove and insert the RAM?
좋은 질문 입니까?
평판: 685.3k
3.4k
1.1k
2.6k
My question is why you are ejecting the RAM that much. And why do you feel you need to do it again?
To get it out get a friend with a small pair of needle nose pliers. While one of you pushes on the levers the other grasps just the edge of the where no cuicuits or chips a re and gentle pulls.
Then make a decision and put the correct RAM back in one last time and leave it alone.
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 3
30일 전: 7
전체 시간: 70
