주요 콘텐츠로 건너뛰기

2세대 iPhone. Model A1241 / 8 또는 16GB 용량 / 검정 또는 흰색 플라스틱 뒷면. 첫 번째 iPhone보다 수리는 더 간단하며 스크루드라이버, 비집는 도구 그리고 흡입 도구가 필요합니다.

1169 질문 전체 보기

leftover part after disassembly

iphone 3g 8 gb

I have a leftover] small piece

Block Image

(~1cm long) of metal with a screw hole after disassembly] and I am trying to figure out where it goes. I do not see it in the tear down pictures so I am assuming it must have come off during the disassembly.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 1개

Here's the teardown, do you see the part? iPhone 3G Teardown

댓글 달기

답변 2개

가장 유용한 답변

it will be camera holder. place it on the top of the camera, the hole facing to the right, there is a screw hole without the screw. put it there...

해당 답변은 도움이 되었습니까?

점수 1

댓글 1개:

would you back that up with a link to a picture?

댓글 달기

Check out the top right hand of the pic where you see the are marked 'E' that is where the piece go's (on top of the camera assmebly)

http://i54.tinypic.com/5oypm1.jpg

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

kuria 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 6

전체 시간: 1,114