I have decided to replace my lcd screen with bezel. It seems harder than just replacing lcd screen. I managed to scatch the flex cable for motor, power etc with tweezers. So, I have ordered new flex cable aswell.
Back to the question, on top of the heatsink it looks like thermal paste. Should I just put thermal paste on my new bezel?? Or where can I get what's on there now.
Thank you
좋은 질문 입니까?
평판: 159.8k
11
191
368
If the new screen with frame does not come with that then you should transfer it carefully to the new frame to the same location.
That is basically a thermal pad that transfers heat from the logic board to the frame to dissipate it.
I'm assuming it sits under the CPU part of the board.
You wouldn't want a thermal throttling phone would you?
해당 답변은 도움이 되었습니까?
I see..It does sit below the CPU part of the board.. I don't think I will be able to transfer it. I will need to buy new thermal pad. I'm guessing 0.5mm thickness thermal pad is the best.
24 시간 전: 0
7일 전: 0
30일 전: 1
전체 시간: 791
