I've removed the hex nuts from both heat sinks on my Mac Pro 2,1 - I was intending to upgrade the two processors – The Heat Sinks are absolutely stuck as if they are epoxied to the Processor by the thermal paste. No movement what-so-ever, almost as if there is another screw or clip holding them in place. Is there a way to loosen this area with Thermal Material Remover?
좋은 질문 입니까?
평판: 479.7k
35
329
971
I would give an ultrasonic cleaner a try with a solvent that can remove (soften) the thermal paste. You should try a twisting motion vs splitting the parts apart.
Just be careful on what you use! As you don't want the fumes to ignite from a spark!
해당 답변은 도움이 되었습니까?
24 시간 전: 0
7일 전: 1
30일 전: 2
전체 시간: 164
