주요 콘텐츠로 건너뛰기

다양한 TV 브랜드 및 스타일 안내서 및 지원.

9292 질문 전체 보기

How do I repair a Sony KDL-52XBR4 HDMI port.

I accidentally connected a Receiver's HDMI input to the TV's HDMI input. The TV's HDMI input hasn't worked since. How would I repair it? It's the HDMI-1 on the rear panel.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 -1
댓글 달기

답변 2개

선택된 해법

If your television is experiencing HDMI troubles including no signal and distorted video, see the Insignia NS-24ER310NA17 No Signal With HDMI problem page for possible causes and solutions.

The XBR line is superb.

Bad, bad luck on the HDMI-1 port - that's an easy mistake to make. Troubleshooting the component level on the circuit board is not fun.

But given that these units are still available as refurbished for about $1,200 USD, it may be worth repairing.

If you are a tech or an advanced hobbyist with workspace, and proper test and repair gear, and access to parts, and repair manuals, you could take a whack at it.

Otherwise, it may still be worth paying the $100 USD diagnosis fee at an authorized SONY repair shop.

With time and materials, I would guess your total bill for out-of-warranty repair would be about $250 USD (including the $100 USD diagnosis fee) if the problem is isolated to the HDMI interface.

It would bug me not to have that port working, so I fully understand why you would like to fix it ! Best wishes and hope this beautiful set gets back on its feet soon.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기
가장 유용한 답변

I am surprised that HDMI IN to HDMI IN connection has damaged the port because as an input port none of them carry the active +5V line. Normally HDMI port should get damaged only when the Source (e.g. Blu Ray, set top Box,.. etc) is connected to an HDMI OUT (say on a repeater or AVR).

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Tim Wardlow 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 5,280